Depending on version

• Remove CAMERA FOR LANE DEPARTURE WARNING
• Remove the RAIN/LIGHT/SOLAR AND CONDENSATION SENSOR and immediately install on a new windscreen or a new sensor

Tape off body in area of piercing point with fabric adhesive tape.

Push wire from ROLL OUT 2000  along line (1) through adhesive bead (2).

For details on how to proceed, refer to: WINDOW REMOVAL WITH "ROLL OUT 2000" .

Lift out windscreen with suction cup.

Fig 1: Identifying Wire Line And Adhesive Bead

Courtesy of BMW OF NORTH AMERICA, INC.