51 47 243 Removing and installing/replacing all luggage compartment trims (without ski bag): Notes

Necessary preliminary tasks:

NOTE: The luggage compartment partition wall F02 with optional equipment rear air conditioning is shown.

Lever out expanding rivet (1).

Feed out luggage compartment partition wall (2).

Fig 1: Removing Luggage Compartment Separating Wall Cover

Courtesy of BMW OF NORTH AMERICA, INC.

F01h and F02h only:

Release expanding rivets (1) and expanding rivets (2) and remove bulkhead panel (3).

Fig 2: Identifying Bulkhead Panel And Expanding Rivets

Courtesy of BMW OF NORTH AMERICA, INC.