51 47 066 Removing and installing/replacing illuminated finishing strip on front left or right entrance

Special tools required:

Necessary preliminary tasks:

Unclip cover (1) using special tool 00 9 317 .

Disconnect plug connection (2).

Remove cover (1).

Fig 1: Removing Front Entrance Cover Strip Cover Using Special Tool (00 9 317)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

If necessary, replace faulty clips (1).

If necessary, lever clips out of entrance with suitable tool.

Fig 2: Identifying Finishing Strip Clips

Courtesy of BMW OF NORTH AMERICA, INC.