62 30 005 Removing and installing/replacing trim for Head-Up Display

Lever out trim for Head-Up Display (1) with special tool 00 9 317 at mounting points (2).

Feed cover for Head-Up Display (1) in direction of arrow out of instrument panel trim (2) and remove.

Fig 1: Removing Head-Up Display Using Special Tool 00 9 317

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Make sure retaining lugs (1) and (2) and sleeve (3) of cover for Head-Up Display (4) are correctly seated.

Fig 2: Identifying Lugs, Sleeve Of Cover And Head-Up Display

Courtesy of BMW OF NORTH AMERICA, INC.