11 22 Flywheel
TIGHTENING TORQUE SPECIFICATION - FLYWHEEL
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Flywheel to crankshaft (automatic transmission) | N54 | M12x1.5x25.5 | Replace screws | |
| 1. Jointing torque | 30 Nm | |||
| 2. Final torque | 125 Nm | |||
| 2AZ DM flywheel to crankshaft (manual transmission) | N54 | M12x1.5x 25.35 | Replace screw | 120 Nm |