51 22 330 Removing and installing/replacing window cavity cover strip on inside rear door

IMPORTANT: The "INSTRUCTIONS ON FITTING WINDOW GUIDE SEALS " serve as the basis for this repair instruction and must be observed without fail.

Necessary preliminary tasks:

Pull front window cavity cover strip (1) off rear door.

Installation note:

Moisten window cavity cover strip (1) prior to fitting with approved lubricant, see 3. AUXILIARY MATERIALS AND TOOLS .

Fig 1: Pulling Front Window Cavity Cover Strip

Courtesy of BMW OF NORTH AMERICA, INC.

Pull rear window cavity cover strip (1) off rear door.

Fig 2: Pulling Rear Window Cavity Cover Strip

Courtesy of BMW OF NORTH AMERICA, INC.