63 25 000 Removing and installing/replacing auxiliary brake light

Remove supplementary brake light cover (1) in direction of arrow from molded roofliner (2).

Fig 1: Removing Supplementary Brake Light Cover From Molded Roofliner

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Guides (1) and catches (2) must not be damaged.

Make sure cover is correctly seated on supplementary brake light (3).

Fig 2: Identifying Supplementary Brake Light With Catches And Guides

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1) and disconnect.

If necessary, unclip plug connections (2) on supplementary brake light (4).

Unlock slide (3) on both sides and remove supplementary brake light (4) in direction of arrow from rear window (5).

Installation:

Make sure supplementary brake light (4) is correctly positioned in rear window (5).

Fig 3: Removing Supplementary Brake Light From Rear Window

Courtesy of BMW OF NORTH AMERICA, INC.