51 31... General Procedure When Dismantling/Installing Bonded Window Glass: Disassembly
The following dismantling methods are applied, according to the version:
- ROLL OUT 2000
- OSCILLATING KNIFE (not permissible for vehicles with window bonding on carbon body components)
- "SPIDER" WINDSCREEN REMOVAL SYSTEM
NOTE:
When cutting out the window glass with wire pull handles, there is a risk of damage to the window glass if the wire is pulled over the window edge.
Unless otherwise described, only use this method when replacing the window glass.
Unless otherwise described, only use this method when replacing the window glass.
Follow the vehicle-specific repair instructions!