LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2012 >> 650i 2D Convertible, 4.4L Eng, Standard Trans >> Labor Times >> Other Variant >> Brakes >> Mechanical - Hydraulic >> Brake Shoes &/Or Pads >> Remove & Replace

Brake Shoes &/Or Pads: Remove & Replace

WARNING: This page is about the 650i 2D Convertible, 4.4L Eng, Automatic Trans, which is a different variant/trim than selected.
Includes: Clean, lube and/or replace Brake Hardware as necessary. Adjust Brakes (where applicable). Includes: Repack Wheel Bearings (where applicable). DOES NOT include refinishing.

Applies ToNoteStandard HoursWarranty HoursSkill Level
All1.9B
Front,Both Sides1.1B
Rear,Both Sides1.0B
Combination Procedure: BRAKE HOSE: Replace:
Includes: Bleed Brake System.
One0.3B
Combination Procedure: BRAKE SYSTEM: Bleed:
0.9B
Combination Procedure: CALIPER: Overhaul:
OneDOES NOT include Bleed System.0.3B
Combination Procedure: CALIPER: Replace:
OneDOES NOT include Bleed System.0.1B
Combination Procedure: DISC ROTOR: Burnish Brake Rotors While Driving Vehicle:
0.5B
Combination Procedure: DISC ROTOR: Remove & Install or Remove & Replace:
Each,Front0.2B
Each,Rear0.3B
Combination Procedure: WHEEL BEARING: Replace:
Front,Both1.8B
Front,One Side1.0B
Rear,Both2.2B
Rear,One Side1.2B