11 33 054 Removing and installing/renewing rocker arms on right side (N63)

Special tools required: 

• 11 4 480

  (cylinder bank 1 to 4) 

Necessary preliminary work: 

• Remove INLET AND EXHAUST ADJUSTMENT UNIT  on right side.
• Remove right INLET CAMSHAFT .
• Remove right EXHAUST CAMSHAFT .

Remove rocker arm (1) and set down in neat order in special tool 11 4 480 .

Install rocker arm (1).

Align all rocker arms (1) straight.

Fig 1: Identifying Rocker Arms

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.