11-8530 Removal and fitting aid

0495728 118530 Removal and fitting aid Minimum set: Mechanical tools MW

NOTE: (Removal and mounting tool) For removal and installation of sealing cap of vacuum pump. [Released]

Storage Location

B20

C20

SI number

01 20 06 (299)

Fig 1: Identifying Removal And Fitting Aid (0495728)

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

= 0495729 Plate
NOTE: (base plate) Remaining inventories will be sold off followed by discontinuation and then available as part of complete set 11 8 530 = 83 30 0 495 728 only. [Not available separately]
= 0495730 Plate
NOTE: (pressure plate) Remaining inventories will be sold off followed by discontinuation and then available as part of complete set 11 8 530 = 83 30 0 495 728 only. [Not available separately]
= 0495731 Spindle
NOTE: (spindle (pressure plate)) Remaining inventories will be sold off followed by discontinuation and then available as part of complete set 11 8 530 = 83 30 0 495 728 only. [Not available separately]
= 0495732 Spindle
NOTE: (spindle (unmounting plage)) Remaining inventories will be sold off followed by discontinuation and then available as part of complete set 11 8 530 = 83 30 0 495 728 only. [Not available separately]
= 0495733 Screw
NOTE: (Set of screws M10 (N54)) Available with complete set 11 8 530 = 83 30 0 495 728 only. [Not available separately]
= 0495734 Screw
NOTE: (Set of screws M11 encl. sleeve (N53)) Liquidation of existing inventory and then available with complete set 11 8 530 = 83 30 0 495 728 only. [Not available separately]
= 0495735 Plate
NOTE: (unmounting plate) Remaining inventories will be sold off followed by discontinuation and then available as part of complete set 11 8 530 = 83 30 0 495 728 only. [Not available separately]

= 0496704
= 0496704 Bush
NOTE: Remaining inventories will be sold off followed by discontinuation and then available as part of complete set 11 8 530 = 83 30 0 495 728 only. [Not available separately]

In conjunction with: 11 8 530