51 16 Mirrors, Finishers, Ashtrays, Consoles
TIGHTENING TORQUE SPECIFICATIONS - MIRRORS, FINISHERS, ASHTRAYS, CONSOLES
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Exterior mirror to front door | F01 / F02 / F03 / F04 / F07 / F10 / F11 / F18 | thread cutting | 6 Nm | |
| New rear view mirror, initial screw connection | 8 Nm | |||
| F25 | thread cutting | 9 Nm | ||
| New rear view mirror, initial screw connection | 11 Nm | |||
| F06 / F12 / F13 | thread cutting | 8 Nm | ||
| 2AZ Sun visor to body | F01 / F02 / F03 / F04 / F07 / F10 / F11 / F18 / F25 | 2.5 Nm | ||
| 3AZ Grab handle, front/rear | F01 / F02 / F03 / F04 / F07 / F10 / F11 / F18 | 3 Nm | ||
| 4AZ Support, centre console | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 / F25 | 4.5 Nm | ||
| 5AZ Floor trim panel to carrier | F01 / F02 / F03 / F04 | 2.5 Nm | ||
| 6AZ Decorative trim to centre console / support | F01 / F02 / F03 / F04 / F06 / F12 / F13 | 1.2 Nm | ||
| 7AZ Holder, centre console, front, middle, to tunnel | F01 / F02 / F03 / F04 | 4.5 Nm | ||
| 8AZ Centre console to instrument panel | F01 / F02 / F03 / F04 | 2.5 Nm | ||
| 9AZ Decorative trim to centre console | F01 / F02 / F03 / F04 | Dia. 5 | mm | Oval-head screw for light alloy 4 Nm |
| F01 / F02 / F03 / F04 | TS5 x 12 | Plastic screw | 2.8 Nm | |
| 10AZ Centre console / support to dashboard | F01 / F02 / F03 / F04 | 2.5 Nm | ||
| F12 / F13 | 1.2 Nm | |||
| 11AZ Trim, rear, with rear compartment nozzle | F01 / F02 / F03 / F04 | 2.5 Nm | ||
| 12AZ Rear console to body shell holder | F01 / F02 / F03 / F04 | 6 Nm | ||
| 13AZ Oddments tray, centre armrest, to support, centre console | F01 / F02 / F03 / F04 / F07 | 1.5 Nm | ||
| F06 / F12 / F13 | 1.2 Nm | |||
| 14AZ Handle to inner part, lid, glovebox | F01 / F02 / F03 / F04 / F25 | 1.5 Nm | ||
| 15AZ Lid, glove box / end cover to housing | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | 1.5 Nm | ||
| 16AZ Glove box/storage compartment to dashboard | F01 / F02 / F03 / F04 / F06 / F07 / F10 / F11 / F12 / F13 / F18 | 1.8 Nm | ||
| F25 | 2.4 Nm | |||
| 17AZ Guide rail, roller sunblind, B-pillar | F01 / F02 / F03 / F04 | Self-tapping screw, black | 2 Nm | |
| F03 | Replace screws. | 2.5 Nm | ||
| 18AZ Roller sunblind module | F01 / F02 / F04 | Oval flange head screw (ISA) | 3 Nm | |
| F03 | 8 Nm | |||
| F06 / F07 / F10 / F11 / F18 | 1.5 Nm | |||
| F25 | 0.7 Nm | |||
| 19AZ Electric motor to function carrier | F01 / F02 / F04 | Flat-head screw | 4.4 Nm | |
| F03 | 8 Nm | |||
| 20AZ Engine to function carrier, top | F01 / F02 / F04 | Oval-head screw | 2 Nm | |
| F03 | 3 Nm | |||
| 21AZ Vent window guide rail - window bar connection | F03 | 4.6 Nm | ||
| 22AZ Centre console to support | F07 | 1.8 Nm | ||
| 23AZ Bracket, handle, to bodyshell | F01 / F02 / F04 | 3 Nm | ||
| 24AZ Support to holder, support part | F12 / F13 / F06 | 2.5 Nm | ||
| 25AZ Side bracket to support | F06 / F12 / F13 | 1.2 Nm |