Removing luggage compartment floor on left

Graphic shows side wall partially removed for purposes of clarity.

Mark severance cut (1) at component edge and cut.

Open welded connections in area (2).

Fig 1: Identifying Severance Cut And Welded Connection Area

Courtesy of BMW OF NORTH AMERICA, INC.

Open welded connections in area (1).

Fig 2: Identifying Welded Connection Area

Courtesy of BMW OF NORTH AMERICA, INC.

Open welded connections in areas (1).

Remove luggage compartment floor (2).

Fig 3: Identifying Luggage Compartment Floor And Welded Connection Areas

Courtesy of BMW OF NORTH AMERICA, INC.