41 0 0 Contents Of Body General Information

General notes  -> QUALITY STANDARD  -> WORKSHOP EQUIPMENT 

Safety regulations  -> SAFETY AT WORK  -> INFORMATION ON HAZARDS 

-> Information on VEHICLE PROTECTION 

Materials  -> MATERIALS SCIENCE  -> USE OF MATERIALS  in outer shell

-> EXPENDABLE MATERIALS 

Handling components after an accident  - ELECTRICAL SYSTEM , electronics > and fibre optics - Vehicles with > Hybrid drive

- PASSIVE SAFETY 

>

- CHASSIS, SUSPENSION AND > STEERING

- Retractable hardtop

>

Body dimensions  -> 41 00... FRAME ALIGNMENT CONTROL BODY DIMENSIONS

-> 41 00... BODY GAP DIMENSIONS .

Cavity sealing  -> Installation of shaped parts  See 41 00... INSTALLING A CAVITY ACOUSTIC BAFFLE (EXPANDED) , 41 00... INSTALLING A CAVITY ACOUSTIC BAFFLE (NOT EXPANDED)  or 41 00... INSTALLING A CAVITY SEALING WITH 2-COMPONENT PU CAVITY FOAM 

-> POSITION OF SHAPED PARTS 

Vehicle identification number  -> VEHICLE IDENTIFICATION NUMBER, GENERAL 

-> STAMPING VEHICLE IDENTIFICATION NUMBER 

Repair techniques  -> REPAIR STAGE 1 

• Replacement of screwed-on components
• Removing dents

-> REPAIR STAGE 2 

• Bonding and riveting
• Welding using a MAG welder
• without  straightening bench

-> REPAIR STAGE 3 

• Bonding and riveting
• Welding using a spot welding system
• with  a straightening bench

Corrosion protection  -> GENERAL INFORMATION 

Paint  -> GENERAL INFORMATION 

-> INFORMATION / WARNING LABELS 

-> Sectional painting  See 99 00... MISCELLANEOUS PAINTING or 99 00... PAINTWORK (2 AND 3 COATS)