52 14 040 Removing and installing/replacing outer cover on left or right front seat

If necessary, move seat fully forwards and upwards.

Remove trim:

1. Unclip at rear towards top side.
2. Pull on belt opening to one side.
3. Bend trim open slightly at top and bottom on actuating unit.
4. Bend open slightly at top and bottom and pull outwards a little.
   Fig 1: Removing Right Front Seat Trim

   Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Retaining clips must not be damaged.

Fig 2: Identifying Front Seat Trim Retaining Clips

Courtesy of BMW OF NORTH AMERICA, INC.