12 90 Electronics box, wiring harness (N53, N55, N55 Hybrid, N63, N57 D30 U/O/T/S 0/1)
TIGHTENING TORQUE SPECIFICATIONS - ELECTRONICS BOX, WIRING HARNESS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Electronics box, lower section on body | N57 D30 U 0 / N57 D30 O 0 / N57 D30 T 0 / N57 D30 O 1 / N57 D30 T 1 / N57 D30 S 1 / N53 / N63 | 8 Nm | ||
| 2AZ Electronics box, cover on lower section | N57 D30 U 0 / N57 D30 O 0 / N57 D30 T 0 / N57 D30 O 1 / N57 D30 T 1 / N57 D30 S 1 / N53 / N63 | 2.5 Nm | ||
| 3AZ Auxiliary box on heating and air-conditioning unit | N57 D30 U 0 / N57 D30 O 0 / N57 D30 T 0 / N57 D30 O 1 / N57 D30 T 1 / N57 D30 S 1 / N53 / N63 | 2.5 Nm | ||
| 4AZ Supplementary box cover to lower section | N57 D30 U 0 / N57 D30 O 0 / N57 D30 T 0 / N57 D30 O 1 / N57 D30 T 1 / N57 D30 S 1 / N53 / N63 | 2.5 Nm | ||
| 5AZ Earth cable for ignition coils | N53 / N55 / N55 Hybrid | 5 Nm | ||
| 6AZ Carrier plate on heating and air-conditioning unit | N53 / N55 / N55 Hybrid | 2.5 Nm | ||
| 7AZ Positive battery cable to carrier plate | N53 / N55 / N55 Hybrid | M6 | 8 Nm | |
| 8AZ Cable channel to engine block | N53 / N55 / N55 Hybrid | M6 | Replace aluminium screws. | 8 Nm |
| 9AZ Earth cable to crankcase lower section | N53 / N55 / N55 Hybrid | M8 | Replace aluminium screw. | |
| Jointing torque | 8 Nm | |||
| Angle of rotation | 45 ° | |||
| 10AZ Earth cable to rear cylinder head | N53 / N55 / N55 Hybrid | M6 | 8 Nm |