61 31 197 Removing and installing/renewing center console operating facility

Necessary preliminary work:

Removal:

Slacken both screws (1).

Remove center console operating facility (2) from center console trim (3).

Fig 1: Identifying Center Console Operating Facility, Center Console Trim And Slacken Both Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Installation note:

For a uniform joint, press center console operating facility (2) onto side of center console trim.

The centering ribs (1) must touch the center console trim.

Fig 2: Identifying Center Console Operating Facility Onto Side Of Center Console Trim

Courtesy of BMW OF NORTH AMERICA, INC.

Join center console operating facility (2) to center console trim (3).

Tighten down the screws (1).

Fig 3: Identifying Center Console Operating Facility, Center Console Trim And Slacken Both Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: