51 16 165 Removing and installing/replacing complete center console

IMPORTANT: Read and comply with notes on HANDLING WIRING HARNESSES and cables.

When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.

Necessary preliminary tasks:

Release screws (1) from center console (2), front.

Installation note:

When feeding center console (2) in, pay attention to any cables from comfort antenna.

Fig 1: Identifying Center Console Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque 51 16 4AZ .

Fig 2: Identifying Center Console Screws

Courtesy of BMW OF NORTH AMERICA, INC.

4-zone automatic air conditioning option only:

Unlock plug connection (1) on rear compartment blower (2) and disconnect.

Fig 3: Identifying Rear Compartment Blower Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) from center console (2), rear.

Tightening torque 51 16 4AZ .

Remove aerial for Comfort Access (2) from bracket.

Disconnect associated plug connection.

Carefully feed out center console (3) in upward direction.

Fig 4: Identifying Center Console, Comfort Access Aerial And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement