51 32 390 Removing and installing/replacing frame trim on front left or right side window frame
Special tools required:
Necessary preliminary tasks:
- Open side window
- Remove OUTER FRONT DOOR WINDOW CAVITY COVER STRIP
- Remove SEAL FOR DOOR GAP/ROOF FRAME
Disengage rubber window seal (1) at frame trim from window frame.
Installation note:
To facilitate installation, slightly wet rubber window seal with water.
Starting at the front, lever out frame trim from window frame (1) with special tool 00 9 325 and remove.
Installation note:
Replace faulty clips (1) and (2) on frame trim (3). Start at rear when seating frame trim (3).