22 32 050 Replacing cross member for transmission mounting (N55 Hybrid)
WARNING:
High-voltage system - danger to life!
WARNING:
The following points must be strictly observed prior to starting work:
- Disconnect HIGH-VOLTAGE SYSTEM FROM POWER
- Observe SAFETY INFORMATION for handling hybrid cars
Necessary preliminary tasks:
- DISCONNECT high-voltage system from power
- Disconnect BATTERY
- Remove rear UNDERBODY PROTECTION
- Support transmission with jack.
Release lid (1).
Release nut (1) from positive battery cable (2).
Tightening torque 12 36 5AZ .
Release positive battery cable.
Unscrew nut (1) and bolts (2).
Remove gearbox cross member (3).
Tightening torque 22 32 3/4AZ .