00 00... Front and rear brake linings: checking lining thickness with measuring gauge. If linings are replaced: cleaning brake shafts, checking brake disk thickness and surface, applying grease to wheel centering on alloy wheels. If rear linings are replaced: checking parking brake linings
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2006 BMW 330Ci, 2005 BMW 330i, 2005 BMW 330Ci, 2004 BMW 330i, and 2004 BMW 330Ci. However, it is still accessible from the selected car via links, so may be relevant.
Check brake lining thicknesses with measuring gauge at front and rear. For subsequent procedure, refer to DISC - M3, 325I, 325CI, 325XI, 330I, 330CI and .
NOTE:
Issue a separate invoice for replacing the brake linings.
Remove front and (if necessary) rear disk brake linings. For further information on how to proceed, refer to DISC - M3, 325I, 325CI, 325XI, 330I, 330CI and .
- Removing and installing front disk brake linings. See BRAKE DISC
- Removing and installing rear disk brake linings.BRAKE DISC
NOTE:
- Clean brake shafts.
- Replace brake linings if they drop below minimum thickness (refer to TECHNICAL DATA ).
- Replace brake disks if they drop below minimum thickness (refer to TECHNICAL DATA ) and in event of scoring, heat cracks, lateral runout or thickness difference.
- Apply a thin coat of grease to wheel centering on light alloy wheels.
Additional tasks when changing rear linings
Remove rear brake disks. For subsequent procedure, refer to DISC - M3, 325I, 325CI, 325XI, 330I, 330CI and for removing and installing rear brake disks.
NOTE:
- Check parking brake lining for porosity and wear.
- Check expansion lever for ease of movement.