36 11 523 Removing And Installing/Replacing An RDC Trigger Transmitter (Rear)

Necessary preliminary tasks 

• Partially detach rear WHEEL ARCH TRIM

After installation: 

• Carry out RESETTING  of RDC

Disconnect plug connection (1).

Release screws (2) and remove trigger transmitter.

Fig 1: Plug Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

E90 and E91 from 09/2008: 

Disconnect plug connection (1).

Press holder (2) together and detach trigger transmitter (3) towards front.

Fig 2: Plug Connection, Holder And Trigger Transmitter

Courtesy of BMW OF NORTH AMERICA, INC.