72 11 Seat Belts
TIGHTENING TORQUE SPECIFICATIONS - SEAT BELTS
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| Seat belt, front: | |||||
| 1AZ | Automatic reel | Replace microencapsulated screws | |||
| - to B-pillar | E81/E84/E87/E88/E90/E91/E92 | 36 Nm | |||
| E82 | Hexagon screw with washer | 46 Nm | |||
| - to backrest frame | E93 | 36 Nm | |||
| 2AZ | Anchor fitting, belt | Replace microencapsulated screws | |||
| - to front seat | E84/E87/E90/E91 | 44 Nm | |||
| E93 | 36 Nm | ||||
| 3AZ | Belt deflection fitting (to B-pillar, top) | E81/E82/E84/E87/E88/E90/E91/E92 | 36 Nm | ||
| - to head restraint bar Build date up to 09/08 | E93 | M6 | 9 Nm | ||
| - to head restraint bar Build date from 09/08 | E93 | M6 | 8 Nm | ||
| 4AZ | Corner hoop (to B-pillar, middle) | E87/E90/E91/E92 | 3.5 Nm | ||
| E84 | 3 Nm | ||||
| E81/E82 | M5 | 3 Nm | |||
| E81/E82 | M6 | Repair screw | 3 Nm | ||
| E88 | 8 Nm | ||||
| 5AZ | Slide bar to body | E81/E92 | 36 Nm | ||
| E82/E88 | 31 Nm | ||||
| 6AZ | Buckle retractor to front seat | E81/E82/E84/E87/E88/E90/E91/E92/E93 | Replace microencapsulated screws | 38 Nm | |
| 7AZ | Seat-belt extender | E92 | 2.5 Nm | ||
| 8AZ | Coupling gear (stud) | E93 | 3 Nm | ||
| 9AZ | Coupling gear | E93 | 2.5 Nm | ||
| Seat belt, rear: | |||||
| 20AZ | Automatic reel for rear seat, normal | Replace microencapsulated screws | |||
| - middle to body | E90 | 36 Nm | |||
| - outer to body | E90/E88 | 36 Nm | |||
| 21AZ | Automatic reel for rear seat, through-loading | Replace microencapsulated screws | |||
| - middle to backrest | E84 | 38 Nm | |||
| - outer to body | E81/E82/E84/E87/E90/E91/E92/E93 | 36 Nm | |||
| 22AZ | Anchor fitting, belt | Replace microencapsulated screws | |||
| - middle | E87/E90/E91 | 31 Nm | |||
| - outer | E81/E82/E84/E87/E88/E90/E91/E92/E93 | 38 Nm | |||
| 23AZ | Seat belt buckle | Replace microencapsulated screws | |||
| - with buckle retractor | E87/E90/E91 | 38 Nm | |||
| - without buckle retractor | E81/E82/E84/E87/E88/E90/E91/E92/E93 | 38 Nm | |||
| 24AZ | Belt deflection fitting (to rollover protection system) | E88/E93 | Replace microencapsulated screws | 36 Nm | |