1136 Variable camshaft control (N54)
TIGHTENING TORQUE SPECIFICATIONS - VARIABLE CAMSHAFT CONTROL
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | VANOS with sensor gear to inlet and exhaust camshafts | N54/N54T | M10x94 | Replace screw | |
| Jointing torque | 20 Nm | ||||
| Angle of rotation | 180 ° | ||||
| 2AZ | Non-return valve VANOS to cylinder head | N54/N54T | M14 x 1.5 | 13 Nm | |
| 3AZ | Solenoid valve holder to cylinder head | N54/N54T | M6x12 | 10 Nm | |