1112 Cylinder head with cylinder head cover (N54)
TIGHTENING TORQUE SPECIFICATIONS - CYLINDER HEAD WITH CYLINDER HEAD COVER
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Cylinder head bolt | N54/N54T | M11 x 135 | Replace screws. | |
| Jointing torque | 30 Nm | ||||
| 1. Angle of rotation | 90 ° | ||||
| 2. Angle of rotation | 90 ° | ||||
| 3. Angle of rotation | 45 ° | ||||
| 2AZ | Cylinder head bolt | N54/N54T | M9 x 95 M9 x 125 | Replace screws. | |
| Jointing torque | 30 Nm | ||||
| 1. Angle of rotation | 90 ° | ||||
| 2. Angle of rotation | omitted | ||||
| 3. Angle of rotation | 45 ° | ||||
| 3AZ | Cylinder head bolt | N54/N54T | M9 x 30 M9 x 70 | 22 Nm | |
| 4AZ | Cylinder head cover to cylinder head. | N54/N54T | M6 | 8.5 Nm | |
| 5AZ | Metal holder to cylinder head. | N54/N54T | M6 x 16 | 8 Nm | |
| 6AZ | Lifting eye to cylinder head. | N54/N54T | M8 x 20 | 19 Nm | |
| 7AZ | Ignition coil cover to cylinder head cover. | N54/N54T | M6 x 20 | 4 Nm | |
| 8AZ | Hexagon screw (2 x) Metal bracket for ignition coil cover to cylinder head cover. | N54/N54T | M6 x 12 | 4 Nm | |