51 24 145 Removing And Installing/Replacing Button For Tailgate Activation

Special tools required:

Slide special tool 00 9 323 under the front edge of button (1) and lift button (1) out.

Pull button (1) out of rear lid (2).

Fig 1: Pulling Button Out Of Rear Lid

Courtesy of BMW OF NORTH AMERICA, INC.

Unplug connector (1) and remove button (2).

Installation note:

Perform function check with tailgate open.

Fig 2: Connector And Button

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement

Carefully release latch mechanisms (1) and remove microswitch (2).

Fig 3: Latch Mechanisms And Microswitch

Courtesy of BMW OF NORTH AMERICA, INC.