51 71... Removing And Installing/Replacing Radiator Seal
WARNING:
Scalding hazard!
Only perform work after engine has cooled down.
Only perform work after engine has cooled down.
IMPORTANT:
Observe safety instructions
. See 51 00... SAFETY INSTRUCTIONS FOR WORKING ON CARS WITH AIRBAG SYSTEMS or 72 SAFETY PRECAUTIONS AND GENERAL INFORMATION
for raising the vehicle
Necessary preliminary tasks
- Remove FRONT UNDERBODY PROTECTION
NOTE:
Prior to removing, pay attention to the exact installation position with respect to the adjoining components.
Release screws (1).
If necessary, remove underbody protection bracket.
Release catches (2) and feed out radiator seal (3) towards rear.
Installation:
Catches (1) must not be damaged