LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2012 >> 335xi Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body Equipment - Repair - E92 >> Floor-Luggage Compartment-Engine Compartment Trim Panels >> 51 47 491 Removing And Installing/Replacing Rear Underbody Protection >> Two-part underbody protection

Two-part underbody protection

Release screws (1).

Detach underbody protection (2) from bracket (3) and remove.

Installation: 

Ensure correct seating.

Center underbody protection (2) and tighten down screws (1).

Fig 1: Removing Underbody Protection From Bracket
G09851168Courtesy of BMW OF NORTH AMERICA, INC.


Release screws (1).

Detach underbody protection (2) from bracket (3) and remove.

Installation: 

Ensure correct seating.

Center underbody protection (2) and tighten down screws (1).

Fig 1: Removing Underbody Protection From Bracket
G09851171Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals