32 41 Pump And Oil Supply
TIGHTENING TORQUE SPECIFICATIONS - PUMP AND OIL SUPPLY
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Oil reservoir to holder | E81/E82/E84/E87/E88/E90/E91/E92/E93 | M6 | 4 Nm | |
| 2AZ | Multipurpose holder to body/holder for oil reservoir | E81/E82/E84/E87/E88/E90/E91/E92/E93 | M6 | 5 Nm | |
| 3AZ | Belt pulley to power steering pump | E81/E82/E84/E87/E88/E90/E91/E92/E93 | M8 | Replace bolts | 21 Nm |
| 4AZ | power steering pump on coolant pump | N43/N45/N46/N45T/N46T | M8 | 32 Nm | |
| 5AZ | power steering pump to holder | M47T2/M57T2/N57/N43/N20 | M8 | 19 Nm | |
| 6AZ | Holder of power steering pump to crankcase/oil sump | M47T2/M57T2/N57/N47/N47T/N47S | M8 | 19 Nm | |
| M57T2/335d | M6 | 8 Nm | |||
| N51/N52/N52K/N53 | M10 | Replace aluminum screws. Use only Helicoil made of aluminum for thread repairs. Jointing torque and angle of rotation must be observed without fail. |
|||
| Jointing torque | 20 Nm | ||||
| Angle of rotation | 90 ° | ||||
| N54/N55 | M10 | Follow REPAIR INSTRUCTION . | 38 Nm | ||
| 7AZ | Power steering pump to crankcase | N43/N45/N46/N45T/N46T | M8 | 21 Nm | |
| 8AZ | Pressure line to power steering pump | E81/E82/E84/E87/E88/E90/E91/E92/E93 | M16 | 35 Nm | |
| 9AZ | Pressure line to hydraulic steering gear | E81/E82/E87/E88/E90/E91/E92/E93, auser S65 | M14 non-return valve | 30 Nm | |
| E84 | M14 | 35 Nm | |||
| S65 | M14 non-return valve | 33 Nm | |||
| 10AZ | Return line to hydraulic steering gear | E81/E82/E84/E87/E88/E90/E91/E92/E93 | M16 | 35 Nm | |
| 11AZ | Mounting, hydraulic line | E81/E82/E84/E87/E88/E90/E91/E92/E93 | M6 | 8 Nm | |
| 12AZ | Vane pump to air conditioning compressor support | S65 | M8 | 19 Nm | |
| 13AZ | Separation point expandable hose part 1 to expandable hose part 2 | E84 | 35 Nm | ||