61 71 015 Removing and installing/replacing a spray nozzle in windscreen washer system

NOTE: The jet nozzles of the windscreen washer system are preset at the factory and cannot be readjusted.

Necessary preliminary tasks

Press detent lug (1).

Detach unlocked plug housing (2) in direction of arrow.

Detach hose (3) from spray nozzle.

Fig 1: Detaching Windscreen Washer System Plug Housing

Courtesy of BMW OF NORTH AMERICA, INC.

Release spray nozzle (1) in direction of arrow from cowl panel cover and remove.

Installation:

Make sure spray nozzle (1) is correctly seated.

Fig 2: Removing Spray Nozzle

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Following parts of spray nozzle (4) must not be damaged or missing:

1 Plug connection
2 Hose connection
3 Detent lug, bottom
5 Detent lug, top

Fig 3: Identifying Spray Nozzle Plug Connection, Hose Connection And Detent Lug
Courtesy of BMW OF NORTH AMERICA, INC.