65 13 188 Removing and installing/replacing rear mid-range speaker (in rear shelf)

Special tools required:

Lever speaker cover (1) with special tool 00 9 340 out of rear shelf (2).

Fig 1: Removing Speaker Cover Using Special Tool

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Lugs (1) and locks (2) of speaker cover (3) must not be damaged.

Fig 2: Identifying Speaker Cover Lugs And Locks

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove mid-range speaker (2) upwards from rear shelf (3).

Disconnect associated plug connections and remove mid-range speaker (2).

Fig 3: Identifying Rear Shelf Mid Range Speaker

Courtesy of BMW OF NORTH AMERICA, INC.