63 25 000 Removing And Installing/Replacing Auxiliary Brake Light

Unclip auxiliary brake light cover (1) at retaining points (3).

Remove auxiliary brake light cover (1) in direction of arrow from roofliner (2).

Fig 1: Unclipping Auxiliary Brake Light Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Retaining hooks (3) and guides (2) of auxiliary brake light cover (1) must not be damaged.

Make sure cover for auxiliary brake light (1) is correctly seated.

Fig 2: Retaining Hooks, Guides And Brake Light Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1) and disconnect.

Unlock slide (2) in direction of arrow and remove auxiliary brake light (4) from rear window (3).

Installation:

Make sure auxiliary brake light (4) is correctly positioned on rear window (3).

Fig 3: Removing Auxiliary Brake Light Of Rear Window

Courtesy of BMW OF NORTH AMERICA, INC.