Aligning rear spoiler for installation

Fig 1: Rear Spoiler Installation Dimension

Courtesy of BMW OF NORTH AMERICA, INC.

Determine center of rear lid.

Mark dimensions (A, B, C, D and E) on adhesive tapes (1) on left and right. Adhesive tapes must not be situated on bonding surface of rear spoiler.

Model series	A	B	C	D	E
E90	250	200	330	332	334
E92	250	200	372	370	361
E82	250	200	371	372	376

Clean bonding surface on rear lid and rear spoiler with spirit.

NOTE: For cleaning, use a fluff-free disposable cloth or a clean cleaning cloth.

Air drying time at least 1 minute.