1151 Coolant pump with drive (N54)
TIGHTENING TORQUE SPECIFICATIONS - COOLANT PUMP WITH DRIVE
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Coolant pump to crankcase | N54/N54T | M8 x 26 | Replace screws. Thread repairs exclusively with aluminum Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 10 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 2AZ | ASA screw Coolant pump to bracket. | N54/N54T | M8 x 27 | 20.5 Nm | |
| 3AZ | Hose clamp Coolant hose between coolant pump and coolant thermostat. | N54/N54T | L42-48 | 3 Nm | |
| 4AZ | Hose clamp Coolant hose between coolant pump and feed line. | N54/N54T | L42-48 | 3 Nm | |