1113 Oil sump (N54)
TIGHTENING TORQUE SPECIFICATIONS - OIL SUMP
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Plug Oil drain to oil sump. | N54/N54T | M12 x 1.5 | Replace sealing ring. | 25 Nm |
| 2AZ | ASA screw Oil sump (aluminum) to crankcase lower half. Aluminum screws/bolts are permitted with and without color coding (blue). |
N54/N54T | M8 x 26 | Replace screw. Thread repairs exclusively with aluminum Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 8 Nm | ||||
| Angle of rotation | 60 ° | ||||
| 3AZ | ASA screw Oil sump (aluminum) to crankcase lower half. Aluminum screws/bolts are permitted with and without color coding (blue). |
N54/N54T | M8x112/M8x92 | Replace screw. Thread repairs exclusively with aluminum Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 8 Nm | ||||
| Angle of rotation | 180 ° | ||||
| 4AZ | ASA screw Oil sump (aluminum) to crankcase lower half. Aluminum screws/bolts are permitted with and without color coding (blue). |
N54/N54T | M8 x 36 | Replace screw. Thread repairs exclusively with aluminum Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 8 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 5AZ | ASA screw Oil deflector to crankcase lower half. Aluminum screws/bolts are permitted with and without color coding (blue). |
N54/N54T | M6 x 20 | Replace screw. Thread repairs exclusively with aluminum Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 4 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 6AZ | ASA screw Transmission to oil sump. | N54/N54T | M8 x 50 | 19 Nm | |
| 7AZ | Hexagon screw Holder, transmission oil cooler line, to oil sump. | N54/N54T | M6 x 30 | 8 Nm | |
| 8AZ | Hexagon nut Oil level sensor to oil sump. | N54/N54T | M6 | 8 Nm | |
| 9AZ | Transmission fluid cooler bracket to oil sump | N54/N54T | M8 | 9 Nm | |