1831 Exhaust pipe with catalytic converter/complete system (N55)
TIGHTENING TORQUE SPECIFICATIONS - EXHAUST PIPE WITH CATALYTIC CONVERTER/COMPLETE SYSTEM
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | exhaust system to catalytic converter | N55 | M8 | 21 Nm | |
| 2AZ | Exhaust system to rear wheel carrier | N55 | M8 | 21 Nm | |
| 3AZ | Catalytic converter to turbocharger | N55 | M8 x 40 | Replace clamp | 13 Nm |
| 4AZ | Exhaust system to rear axle final drive | N55 | AM12 | 35 Nm | |
| 5AZ | Clamp | N55 | 45 Nm | ||
| 6AZ | Exhaust system to body | N55 | M8 | 21 Nm | |
| 7AZ | Reinforcement plate to body | N55 | M8 | 21 Nm | |