1831 Exhaust pipe with catalytic converter/complete system (N54)
TIGHTENING TORQUE SPECIFICATIONS - EXHAUST PIPE WITH CATALYTIC CONVERTER/COMPLETE SYSTEM
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Exhaust system to front pipe with catalytic converter | N54/N54T | M8 | 21 Nm | |
| 2AZ | Exhaust system to rear wheel carrier | N54/N54T | M8 | 21 Nm | |
| 3AZ | Front pipe with catalytic converter to turbocharger | N54/N54T | M8 x 40 | If necessary, replace clamp. | 13 Nm |
| 4AZ | Exhaust system to rear axle final drive | N54/N54T | AM12 | 35 Nm | |
| 5AZ | Clamp | N54/N54T | 45 Nm | ||
| 6AZ | Exhaust system to body | N54/N54T | M8 | 21 Nm | |
| 7AZ | Exhaust flap terminal to exhaust tailpipe | E71/N54 | M6 | 12 Nm | |
| 8AZ | Exhaust flap with exhaust tailpipe to terminal | E71/N54 | M6 | 12 Nm | |