17 11 000 Removing and installing radiator (N53, N54, N54T)
WARNING:
Risk of scalding!
Only perform this repair work after engine has cooled down.
Only perform this repair work after engine has cooled down.
IMPORTANT:
Wear safety goggles and protective gloves.
Necessary preliminary tasks:
- Follow instructions for REPAIR WORK ON THE COOLING SYSTEM .
- Remove FAN COWL .
- Drain coolant See 17 00 008 DRAINING AND ADDING COOLANT (N54, N54T) .
- Unlock coolant hoses and detach.
Only on N54, N54T
Release the clamp and detach and remove the charge air duct (1).
Tightening torque: 13 71 6AZ .
Automatic only
Release bolt and detach hose (1).
Automatic only
Release bolt (1) and detach hose (2).
Release screws.
Tightening torque: 17 11 2AZ .
Carefully feed out radiator (1) towards top and remove.