31 35 005 Removing and installing/replacing push rod (anti-roll bar link) for left/right anti-roll bar

Note (for M3, M Coupe): 

Make sure anti-roll bar link is installed in correct position.

1. Connection, anti-roll bar link to spring strut
2. Connection, anti-roll bar link to anti-roll bar
   Fig 1: Identifying Connections Of Stabilizer Link To Spring Strut And Stabilizer Link To Stabilizer

   Courtesy of BMW OF NORTH AMERICA, INC.

Release nut (1) and remove bracket for brake hose.

Release nut (3) and remove anti-roll bar link (2).

Installation note: 

Tightening torque 31 35 2AZ .

Replace self-locking nuts.

Fig 2: Identifying Anti-Roll Bar Link And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.