51 13 116 Removing and installing cowl panel cover

Necessary preliminary tasks

IMPORTANT: Danger of water ingress via fan into vehicle interior if cowl panel cover and sealing strip are not correctly fitted.

Pull off hose (1).

Disconnect plug connections (2).

Detach mucket (3).

Take off cover (4).

Installation:

Make sure cover (4) is correctly seated.

Fig 1: Identifying Hose, Plug Connections, Mucket, And Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Sealing strip (1) must be fitted (water ingress)

If necessary, retrofit sealing strip (1).

Installation:

Fig 2: Identifying Sealing Strip

Courtesy of BMW OF NORTH AMERICA, INC.

Make sure grommets (1) are correctly seated on wiper pivots.

Grommets (1) for wiper pivots must not be damaged.

If necessary, replace grommets (1).

Fig 3: Identifying Grommets

Courtesy of BMW OF NORTH AMERICA, INC.

E90/E91 only

Installation:

Cowl panel cover (1) must be correctly guided on right and left under windscreen cover (2).

Fig 4: Identifying Cowl Panel Cover And Windscreen Cover

Courtesy of BMW OF NORTH AMERICA, INC.

E92/E93 only

Installation:

Cowl panel cover (1) must be correctly guided on right and left under windscreen cover (2).

Fig 5: Identifying Cowl Panel Cover And Windscreen Cover

Courtesy of BMW OF NORTH AMERICA, INC.