36 11 523 Removing and installing/replacing an RDC trigger transmitter (rear)

Necessary preliminary tasks 

• Partially detach rear WHEEL ARCH TRIM .

After installation 

• Carry out RESETTING  of RDC.

Disconnect plug connection (1).

Release screws (2) and remove trigger transmitter.

Fig 1: Identifying Plug Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

E90 and E91 from 09/2008: 

Disconnect plug connection (1).

Press holder (2) together and detach trigger transmitter (3) towards front.

Fig 2: Identifying Plug Connection, Holder And Trigger Transmitter

Courtesy of BMW OF NORTH AMERICA, INC.