63 14 120 Removing and installing/replacing rear reflector (until 05/2013)

Special tools required:

NOTE: Work shown on the F30 by way of example, deviations in detail are possible in other models.

Carefully unclip rear reflector (1) on the right side using special tool 00 9 327 .

Remove rear reflector (1) toward the rear from bumper panel (2).

Fig 1: Disconnecting Rear Reflector On Right Side Using Special Tool (00 9 327)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Retaining lugs (1) must not be damaged.

Make sure rear reflector (2) is correctly seated.

Fig 2: Identifying Retaining Lugs And Rear Reflector

Courtesy of BMW OF NORTH AMERICA, INC.