12 90 Electronics box, wiring harness
TIGHTENING TORQUE SPECIFICATION - ELECTRONICS BOX, WIRING HARNESS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Cable channel to cylinder head cover | N55/N55 Hybrid | 8 Nm | ||
| 2AZ | Earth cable to crankcase lower section | N55/N55 Hybrid | M8 | Replace aluminum screw. | |
| Jointing torque | 8 Nm | ||||
| Angle of rotation | 45 ° | ||||
| 3AZ | Earth cable to rear cylinder head | N55/N55 Hybrid | M6 | 8 Nm | |
| 4AZ | Cable channel to engine block | N55/N55 Hybrid | M6 | Replace aluminum screws. | 8 Nm |
| 5AZ | Earth cable for ignition coils | N55/N55 Hybrid | 5 Nm | ||