61 21 Battery with terminal (P L7)
TIGHTENING TORQUE SPECIFICATION - BATTERY WITH TERMINAL (P L7)
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Battery cable, positive terminal, battery cable, negative terminal, SBK, IBS (Screw connection from top) Cable shoe to high-current relay |
F2x/F3x/F8x | M6 | 5 Nm | |
| 2AZ | Power distribution box, body | F2x/F3x/F8x | 2.6 Nm | ||
| 3AZ | Distribution box to battery | . | M6 | 8 Nm | |
| 4AZ | Battery cable, positive terminal on distributor Positive terminal of battery cable to transfer terminal point Positive battery cable to jump start terminal point |
F2x/F3x/F8x | M8 | 15 Nm | |
| 5AZ | Mounting, battery holder | F2x/F3x/F8x | nutM6 | 6 Nm | |
| M8 screw | 8 Nm | ||||
| 6AZ | Negative battery cable to body | F2x/F3x/F8x | M8 | 15 Nm | |
| 7AZ | Positive battery cable of sub floor to bolt of separation wall seal | F2x/F3x | M6 | 8 Nm | |