17 11 000 Removing and installing radiator (N55)

WARNING: Risk of scalding!
Only perform this repair work after engine has cooled down.

IMPORTANT: Wear safety goggles and protective gloves.

Necessary preliminary work:

Only vehicles with automatic transmissions:

Unlock and detach coolant hose (1) from transmission oil cooler on the radiator.

Fig 1: Identifying Coolant Hose

Courtesy of BMW OF NORTH AMERICA, INC.

Release and disconnect coolant hoses (1).

Unfasten screws (2).

Tightening torque 17 10 2AZ .

Fig 2: Identifying Coolant Hoses And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Remove cover (1) from the radiator.

Carefully feed out radiator (2) towards top and remove.

Fig 3: Removing Cover From Radiator

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Make sure the installation position of the cover (1) on the left and right module carriers (2) is correct!

Fig 4: Identifying Left/Right Module Carriers And Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Reassemble the vehicle.