LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2012 >> 320i Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine - Repair - F30 (1 Of 4) >> Engine, General >> 11 00 039 Checking compression of all cylinders (N20, N26)

11 00 039 Checking compression of all cylinders (N20, N26)

Special tools required: 

IMPORTANT: High tension - mortal danger!
Interrupt power supply to ignition coils.
Read and comply with notes on compression pressure check.

Necessary preliminary tasks: 

Unscrew tip (1) from special tool 11 0 222 .

IMPORTANT: Then check the Schrader valve that is now visible for secure seating.
Prepare special tool 11 0 222 in conjunction with 11 8 732 and 11 8 731 .

Order number: 0 490 615/0 496 107.

Fig 1: Identifying Special Tool (11 0 222)
G04789653Courtesy of BMW OF NORTH AMERICA, INC.

Prepare special tool 11 0 222 in conjunction with 11 8 732 and 11 8 731 .

Fig 2: Identifying Special Tool (11 0 222) In Conjunction
G05501555Courtesy of BMW OF NORTH AMERICA, INC.

Screw special tool 11 0 222 into special tool 11 8 731 to 10 Nm.

IMPORTANT: Oil screw thread on special tool 11 8 731 .
Fig 3: Tightening Oil Screw Using Special Tool (11 8 731)
G04789654Courtesy of BMW OF NORTH AMERICA, INC.

Connect special tool 11 0 222 to 13 6 052 and 11 4 310 .

Tightening torque. 10 Nm.

Fig 4: Identifying Special Tool (11 0 222, 13 6 052 And 11 4 310)
G09918870Courtesy of BMW OF NORTH AMERICA, INC.

Screw in pressure sensor 81 38 0 431 592 manually with special tool 11 4 310 .

Fig 5: Screwing Pressure Sensor With Special Tool (11 4 310)
G09918871Courtesy of BMW OF NORTH AMERICA, INC.

Screw prepared special tools (1) into cylinders according to diagnosis information.

Fig 6: Identifying Screw Special Tools In Cylinders
G09918872Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect ignition coils and injector wiring harness from DME control unit (2).

Fig 7: Locating DME Control Unit Screws
G09918873Courtesy of BMW OF NORTH AMERICA, INC.

Compression check, electronic. 

Connect ISID and IMIB (Integrated Measurement Interface Box) (1).

Follow diagnosis instruction.

Fig 8: Connecting ISID And Integrated Measurement Interface Box
G09918874Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.

Check fault memory.