51 16 001 Removing and installing/replacing mirror on left or right front door

Necessary preliminary work:

Release door window frame cover (1) at clamp (2) and partially feed out.

Installation note:

Make sure door window frame (1) is correctly seated.

Fig 1: Removing Door Window Frame Cover

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Secure mirror against falling off.

Unfasten plug connection (1) and disconnect.

Release screws (2) and remove inside mirror.

Tightening torque 51 16 1AZ .

Installation note:

Due to self-tapping screws, the tightening torque of the new rearview mirror increases by 2 Nm.

Fig 2: Identifying Door Window Plug Connection And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

The sound insulation (1) must not be damaged or missing.

Run a function check.

Fig 3: Identifying Sound Insulation

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: