51 21 180 Removing and installing/replacing cover on outside door handle

Lever out cap (1) and release screw underneath.

Installation note:

If necessary, replace faulty trim (1).

Fig 1: Identifying Door Trim And Cap

Courtesy of BMW OF NORTH AMERICA, INC.

Pull off cover (1) in direction of arrow with outer door handle (2) opened slightly.

Fig 2: Removing Door Handle Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Version with light package:

Installation note:

Make sure outer door handle light (1) is correctly positioned in area (2).

Guides (3) of outer door handle light (1) must be correctly seated in support for outer door handle (4).

Fig 3: Identifying Guides Of Outside Door Handle Light

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Guides (1) must not be damaged.

Fig 4: Identifying Guides

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement

NOTE: Similar to graphic.

Detach cover (2) from filler piece (3).

Installation note:

Latch mechanisms (1) of cover (2) must not be damaged.

Fig 5: Removing Cover From Filler Piece

Courtesy of BMW OF NORTH AMERICA, INC.