11 66 Vacuum pump
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - VACUUM PUMP
| |
Type |
Thread |
Tightening specification |
Measure |
| 1AZ |
ISA flat mushroom head screws 10.9
Vacuum pump to crankcase. |
N52K |
M6 x 40 |
|
10 Nm |
| 2AZ |
ISA screw
Sprocket wheel to vacuum pump. |
N52K |
M10 x 30 |
|
66 Nm |