11 14 Transmission closing plate
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATION - TRANSMISSION CLOSING PLATE
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | ASA screws Transmission cover plate to crankcase. Aluminium screws/bolts are permitted with and without colour coding (blue). |
N52K | M6 x 16 | Replace screws. Thread repairs exclusively with aluminium Helicoil threaded insert. Jointing torque and angle of rotation must be observed without fail. Jointing torque |
4 Nm |
| Torque angle | 45 ° | ||||